Product ID:PERMA MOLD 315-106
MSDS Date:06/20/1986
FSC:6850
NIIN:00F007528
MSDS Number: BBYFH

Emergency Phone: (800) 428-7149

Info Phone: (800) 428-7149

Cage: DO828

Telephone: 317-923-3211

Cage: 94058

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 70-90%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DEFATTING FO SKIN, EYE IRRITATION.
EXCESSIVE INHALATION CAN CAUSE HEADACHE, DIZZINESS, NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA

First Aid:EYES: FLUSH WITH WATER FOR 15 MIN. SKIN: WASH WITH SOAP AND
WATER. REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE.
INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS
DIFFICULT. IN GESTION: DON'T INDUCE VOMITING. KEEP PERSON WARM,
QUIET, & GET MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:84F
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE SELF CONTAINED RESPIRATORY EQUIPMENT.
WATER FOG MAY BE USED TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM (EVEN EMPTY).

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA WELL. ABSORB ON SOLID ABSORBENT AND SHOVEL INTO CONTAINERS.

Handling and Storage Precautions:STORE BETWEEN 40 & 80F.
Other Precautions:AVOID BREATHING SPRAY MIST.

Respiratory Protection:IF TLV IS EXCEEDED, CANISTER MASK FOR ORGANIC
VAPORS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL & LOCAL EXHAUST VENTILATION
TO KEEP Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NONE
Supplemental Safety and Health

Boiling Pt:B.P. Text:280-350F
Vapor Pres:5.3
Vapor Density:4.5
Spec Gravity:0.774
Evaporation Rate & Reference:(ETHER = 1): .04
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OPAQUE LIQUID, PETROLEUM ODOR.
Percent Volatiles by Volume:77.7%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:CO IF BURNED.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.